• Quick drying, high performance, two-component epoxy for application to
sound gelcoats to help.
• Colors available: Green and Grey
Quick drying, easy to apply, epoxy primer for protection of GRP against osmosis. * Provides protection against osmosis in five coats (250 μm) * Useable down to 5°C * Fast drying allows multiple coat application in a single day Colour: YPA212Green, YPA213Grey Finish: Matt Specific Gravity: 1.4 Volume Solids: 45% Mix Ratio: 3:1 by volume (as supplied) Converter/Curing Agent: YPA214 Typical Shelf Life 2 yrs VOC (As Supplied): 464 g/lt Unit Size: 750 ml, 2.5 lt
Available upon request
Preparation: BARE GRP Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper. PREVIOUSLY ANTIFOULED SURFACE Remove using Interstrip. Wash down with Super Cleaner, rinse with fresh water
and allow to dry. Sand with 180 grade (grit) paper. EXPOSED LAMINATE Patch prime using Gelshield solventless epoxy.
Method: Remove any dust from the surface. Apply required number of coats, detailed in the specification sheets (minimum 250
microns DFT). For ease, alternate the grey and green colours starting and ending with grey. BILGES: Apply 2 coats only
provided there is a gelcoat on the inside of the hull. If no gelcoat, use Gelshield solventless epoxy.
Hints: Mixing Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to
allow bubbles to disperse. Thinner YTA061 Thinners No.7 Other Can be used down to 5°C but for maximum performance, temperature should be above 10°C.
Some Important Points: New hulls must be postcured
for a min. period of 4 weeks before applying Gelshield 200 . Do not apply direct to the
exposed laminate. Do not use below 5°C. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Product temperature should be minimum 10°C and maximum 35°C. Substrate temperature should be minimum 5°C/41°F
and maximum 35°C/95°F.
Compatibility/Substrates: GRP Gelcoats & cured laminate . It should not be used over any one pack products.
Number of Coats: 5 minimum by brush (min. 250 μm DFT)
Coverage: (Theoretical) 9.1
m²/lt by brush
Available upon request
Available upon request
Disclaimer: Color Matching and Prices of each product will be available upon request.