An easily maintained cosmetic finish for above water areas
Thinner: TL 100
White: ATB000
Surf Gray: ATF684
PACK SIZE: 4 LITER CAN and 20 LITERS
Alkyd Megalac™ is a single component alkyd finish PRODUCT INFORMATION Color - PC and Marine color reference. Other colors are available upon request. Finish/Sheen - Semi-Gloss (ISO 2813:1978) Part B (Curing Agent) - Not Applicable Volume Solids -35 ⁺⁄₋ 2% depending on color (ISO 3233:1998) Mix Ratio - Not Applicable Typical Film Thickness - 48-60 microns dry (100-125 microns wet) Theoretical Coverage -7.29 m²/ L at 48 microns dft and 5.83 m²/ L at 60 microns dft Method of Application - Brush, Roller, Conventional Spray, Airless Spray Flash Point - 33oC Induction Period - Not Applicable
Use as a cosmetic finish on steel, wood, and other surfaces exposed above the waterline. It is suitable for new building, maintenance and repair applications.
Mixing: Material is supplied in one pack container. Mix the supplied pack using a power agitator.
Thinner: Not recommended; Use GTA 004 max of 5% by volume when necessary
Airless Spray: Recommended (Tip range 13-19 thou. Total output fluid pressure above 141 kg/cm2 (2010 psi))
Conventional Spray: Recommended
Brush/Roller: Recommended
Storage: The product can be stored in sealed containers at 28 °C for a minimum of one year. Store in dry, shaded conditions, and away from sources of heat and ignition.
Pack Size: 4 Liters and 20 Liters pack
Avoid contact with skin and eyes use proper equipment when handling material (i.e. gloves, goggles, face mask, barrier creams, etc.) Wash affected skin with lukewarm water and soap or suitable industrial cleaner. If come contact with eyes, flush eyes with water for at least 10 minutes and seek for immediate medical attention.
Disclaimer: Color Matching and Prices of each product will be available upon request.